What to Measure in a Paper Defoamer Trial

20-11-2026

The white water in the tank takes a few minutes to subside after the dose goes in. By the next reel, foam is back. Sound familiar? A paper defoamer can clear the surface quickly, but the bigger question is what happens to the air still moving through the stock. Tiny bubbles carried to the forming section can slow drainage and contribute to pinholes, even if the tank looks relatively calm.

paper defoamer

Start with the white water loop

White water is the water that drains through the forming fabric and is collected for reuse. In a recirculating loop, dissolved material and process additives can make foam more persistent. A pump drawing in air or a return line splashing into a tank can keep feeding the problem. Before increasing the paper defoamer dose, check where the bubbles first show up and what changed around that time. A grade change? A different furnish? A drop in tank level?

You could try paper defoamer by running a test with fresh process water sampled at the normal operating temperature. Observe the speed at which foam subsides. Then stir the sample again and see how much comes back. Rapid foam removal looks good in a beaker, and the second foam is a harbinger of what might happen once the water is back in circulation.

paper defoamer

What one mill measured

In a Russian paper mill trial, the papermaking team had first reduced their defoamer usage by 50%, then they stopped the dosing completely. As a result, entrained air at the base headbox rose from about 0.5% by volume to roughly 1.4%, and once dosing resumed the value fell. The levels of dissolved air remained broadly steady. From these two sets of results different stories can be drawn, something that could have been missed had one only looked at the surface level of foam.

Take the paper defoamer trial to the machine

paper defoamer

Record the current paper defoamer feed rate and normalize consumption to kilograms of product per metric tonne of paper. For context, one published paper machine tender set a defoamer consumption ceiling of 0.30 kg per metric tonne of gross production for its white water tank application. That figure was specific to the tender. Your starting dose will depend on the formulation, the furnish and the point of addition.

On the machine, change one thing at a time. Compare runs at similar speeds and on the same grade. Track recurring surface foam, entrained air where you can measure it, and any changes in drainage, sizing or sheet defects. The paper defoamer dose worth keeping is the lowest one that holds up through normal shifts while maintaining sheet quality.

Request a free sample

Shenyang Rise Surface Technologies Co., Ltd. (RISE CHEMICAL) was founded in 2004 and develops and manufactures its products in-house. To request a free paper defoamer sample, tell us your paper grade, white water temperature and pH, and where the foam first appears. Additionally, if you already introduce a defoamer, send the current feed rate, too. This will become our first reference for discussing your trial.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy